How To Remove A Trailer Hitch Lock

Imagine this scenario— you were planning a long trip with your family. Yous got some of your heavy stuff settled on the trailer. Everything went well until you noticed the trailer hitch wouldn't unlock with your cardinal.

You'll either kiss the sweet family travel goodbye or leave the trailer and necessary stuff behind because you can't unlock your automobile hitch.

Skillful thing you lot found this commodity on how to unlock trailer hitch lock considering it doesn't have to go on either of those ways. Read through here to learn more.

Table of Contents

• Ways to Unlock Trailer Hitch Lock
  • What to set up?
  • #i. The pipage method
  • Pace one: Locate the weak spot of the hitch pin.
  • Pace 2: Insert the pipe hole onto the lock.
  • #2. Grind information technology open method
  • Step one. Wear protective equipment
  • Step 2. Cutting the cathing metal.
  • #iii. Picking method.
  • Step ane. Prepare your picking kit
  • Footstep 2. Put pressure on the lever.
  • Step 3. Pick each pin.
• Tin I Remove the Trailer Hitch Lock with Key?
• Determination

Ways to Unlock Trailer Hitch Lock

What to prepare?

You lot volition need either of these tools to get a trailer hitch lock off without a central:

• Metal pipe
• Metal grinder
• Picking kit

#1. The pipage method

Don't have the skills to pick a lock or the proper tools to break the hitch lock open? Don't fret considering this method works like a charm! Just look for a pipage that would comprehend the hitch lock caput, and you're good to go.

This method could exist used to intermission a Reese trailer hitch lock and volition work if you have the key to your tow smart locking hitch pin stuck in the keyhole.

Step 1: Locate the weak spot of the hitch pivot.

Of course, to successfully pause the trailer hitch lock, y'all would want to do information technology on the weaker side of the piece because trying to interruption the metallic side wouldn't give you any success.

To locate the weak spot, wait for the barrel lock and that's usually the weak part of the hitch.

Pace 2: Insert the pipe pigsty onto the lock.

One time y'all've located the part you'll interruption, you lot can get your pipage and start the activeness.

Make sure the pipage hole covers the hitch lock.

• Insert the pipe over the lock.
• Fit the lock inside the pipe hole.
• Pull the pipe on and ensure the lock resists the force per unit area yous're pulling.
• Practise it until the lock breaks off to the metal piece.
• Remove the pin, and yous're done!

---

#ii. Grind it open method

If you're having difficulty fitting the pipe onto the lock, or if the tube won't work on the type of lock, then you lot can use this method.

Grinding the metal is the best way for Reese towpower lock removal or any classes of such lock similar the heavy-duty locks from Master lock.

Grinding your hitch lock open up is also the fastest and easiest way to remove trailer coupler lock without a key or any cuttable metal lock.

Step ane. Vesture protective equipment

This footstep is optional but highly advised. Since it involves a hazardous tool, information technology's much meliorate to do information technology prepared and securely.

Get yourself a confront shield and rubber google to avoid inhaling the dust and fumes you'll go from grinding the metal.

Step 2. Cut the cathing metal.

Since you can practise this on different trailer hitch locks (even on trailer tongue lock and hzn hitch lock), the merely advice here is to cut the locking trunk so y'all tin remove it from the car hitch.

• Decide the office yous're grinding. Make sure the lock slides out of the hitch slot one time the piece is cut.
• Grind the locking torso for a infinitesimal. Keep a close eye on your fingers when using this tool.
• Go along grinding until the metal pieces are separated.

Step ii.one. Cut the universal coupler lock claw.

You can as well use this method to deal with the universal coupler hook lock. What y'all can do to disassemble the coupler ball from the coupler latch is to cut each side of the claw.

• Cutting one side of the claw, simply higher up the hook plate.
• Secure the coupler brawl above the protective support or platform then it won't merely drib once detached from the coupler latch.
• Cut the other side of the hook.

If this method is too unsafe for yous, consider calling a friend or an expert to perform the task.

---

#iii. Picking method .

Got a hitch lock with the usual cylinder and pin tumbler? This picking method would work best on unlocking padlocks without central.

This method is ideal for reese hitch lock pin and latch pin trailer locks and will get out your lock without harm.

Footstep 1. Prepare your picking kit

Of grade, having the right ready of tools would do yous a favor in this kind of job. To pick the hitch lock open, y'all will need either a rake or a hook tool and a tension lever.

Improvise using bobby pins

However, you lot can always improvise a picking kit if you don't take one in your possession. Just become yourself a couple of bobby pins and any cutting tool.

• Become a bobby pivot and go far thinner by removing the round tip of the straight end using any cut tool.
• Pull apart both sides of the bobby pivot to a 160-degree angle using your hand. Ensure the wavy stop is slanted while the straight stop is flat.
• Alter the tip of the straight cease into a hook-looking pin by angle about i centimeter of the tip using the plier—this will act as the picking tool.
• For the tension lever, go another bobby pin and angle an inch of the airtight end to a 90-caste angle.

Step 2. Put force per unit area on the lever .

Become your tension lever and insert it at the lesser of your keyhole. Make sure you're putting enough pressure on the cadre.

Imagine how you lot commonly apply your key. That's how much force per unit area you should put into the tension lever.

Recall that proper tension is necessary for this procedure. A slightly over or under-pressure tension in your lever would take a chance the result of your picking.

Step 3. Pick each pin .

Once your tension lever is already in its position with enough pressure, insert your picking hook and feel the resistance of the pins.

If the pin is loose or springy, get out it aside for a minute and put your focus on a resisting pivot. Push the resisting pin upward to option it.

Once the resisting pin is picked, the springy or loose ones volition first resisting, meaning yous tin can now option information technology by pushing up.

Repeat the procedure until all the pins are pushed upwards. Remember to experience the resistance of the pivot to know which one to pick.

Can I Remove the Trailer Hitch Lock with Primal?

Aye, in a normal situation, yous can remove trailer hitch lock with key. However, if you lost key to trailer hitch lock, so you might want to follow the methods in a higher place.

Conclusion

A trailer hitch is an excellent component of your vehicle as it helps y'all perform heavy-duty tasks. Withal, it's such a hassle one time the lock starts to malfunction or when you lot lose the central.

Post-obit 1 of these methods on how to unlock trailer hitch lock will save y'all from the hassle and money from calling a locksmith.

I am the last fellow member to join Revolar and might be just the luckiest to piece of work with defended people like Teddy and John. Our team has established a process where my only job is writing the best content to deliver incredible ideas and guides.

Source: https://revolar.com/unlock-trailer-hitch-lock/

Share this post